LINbus仿真模擬測試設備

Emulin是一種獨立的LINbus仿真器/模擬器，設計用于汽車總線網絡和相關電子配件產品的研發和生產。Emulin可用于LIN節點或不存在的甚至還沒有設計的LINbus部件的仿真和分析，可以局部調節和測量所有控制參數、信息信號和幀周期。這樣就可以模擬總線應力、過載或電纜變化，同時簡單地并入實驗環境中，如LabView、HPVee等，給出詳細的LINbus錯誤識別，并監控QA和生產環境。

Emulin內置基于菜單的發光顯示器，有8個可配置鍵和12個LED。可提供喚醒/睡眠/斷電模式，以及基于事件的信號配置和序列控制，并具有較大范圍的電阻和電容總線終止形式。

Note:Requires PC program Visulin for recording and displaying measurement data, and also for configuring the emulator.

The top model Emulin is an autonomous test and simulationdevice. Almost all test and control tasks on a LIN bus can becarried out with complete mobility. Primary fields of use arethe developer's workplace, the test station, and the directmeasurement in the vehicle. Above all, users appreciatethe direct access to all timing parameters and signals duringthe measurement. This permits rapid error finding on site --without the bother of connecting to the PC.

Performance Characteristics:

• Emulation and Analysis of LIN nodes / LIN subsystems, simulation of bus participants not actually present
• Local monitoring of the bus traffic
• Local adjustment and measurement of all control parameters, message signals, frame timing
• Two independent configuration data sets, locally switchable
• Wakeup / Sleep / Power Down
• Event-based signal configuration and sequence control
• Detailed LIN bus error recognition and monitoring
• Simple integration into automated test environments (LabView, HP VEE, and others)
• Simulation of erroneous bus adjustment (stress, overload)

Equipment:

• Menu-based illuminated Display
• Operating panel with 8 keys and 12 LED's, freely configurable
• Port interface with 2 analog / digital inputs and outputs
• Frame-based trigger pulse creation via digital output
• Highly variable bus termination ranges (resistive + capacitive)
• High-speed CAN measurement bus for PC communication

Accessories:

• Secondary CAN interface for vehicle bus and gateway emulation, fully configurable
• Digital I/O module
• CAN I/O periphery extension

Emulin USB CAN Interface included